1. Check if all the compressed air and vacuum of the equipment are normal, and check whether the setting parameters of the equipment are in accordance with the actual specifications.
2. Check that all safety devices are in good condition, otherwise promptly notify maintenance personnel. In the production process, we pay close attention to whether the semi-finished products are stretched or run, and whether the light beacons are accurate, and ensure that the parameters meet the technological requirements. Otherwise, the maintenance personnel should be promptly notified of debugging.
3, inspection molding machine molding BT and CC fit the drum under the linear guide, to be cleaned every day, and keep it clean, not with the foot. At the same time, it should also be noted that the safety scan rope device must not be removed.
4. Check whether the safety device of the feeding rack is working properly and whether the electric control cabinet door is closed to prevent the collision of the feeding car and whether the safety device of the BT transfer ring is normal.
In short, we should pay attention to these things when we use the shade machine, so we can pay relatively attention to these aspects. Only in this way can the use be smoother in later use. For these four items, we must pay attention to these contents and reduce the occurrence of various problems in the subsequent use.